INIFORMACJA DOTYCZĄCA COOKIES
Ta witryna wykorzystuje pliki cookies w celu świadczenia usług, dostosowania serwisu do preferencji użytkowników oraz w celach statystycznych i reklamowych.
Możesz zawsze wyłączyć ten mechanizm w ustawieniach przeglądarki.
Korzystanie z naszego serwisu bez zmiany ustawień przeglądarki oznacza, że cookies będą zapisane w pamięci urządzenia.
Więcej dowiesz się klikając w poniższy link "POLITYKA PRYWATNOŚCI".
POLITYKA PRYWATNOŚCI
filtruj
DE
PL
Ballistic blocks
Ballistic Blocks are an effective anti-ricochet/bullet trap protection for each shooting range. They protect against the dangerous reflection of bullets from steel or the formation of steel splinters during the impact of the bullet, thus protecting the shooter against loss of health and life. The blocks reduce to over 95% the lead particles released when the bullet hits a hard surface. The blocks arranged in a tight manner completely prevent the escape of projectiles/ricochets at their connection. We produce blocks in a specific flammability class in the entire thickness section. We can produce them in different colors and sizes. The blocks can be placed on the floor up to a height of 2.5 m with top pressure or in the version with splines that do not require pressure.
The Ballistic Block is intended for:
- Walls and ceiling in closed shooting ranges, complete with concrete or HB steel min. 500;
- Open shooting ranges
- Shooting houses
- Shooting and tactical tracks;
- Safety partitions;
- Main and mobile bullettraps;
- Lateral protection of shooting ranges
Ballistic Blocks have the following properties
- bullet catch / anti-ricochet;
- noise and vibration damping;
- provide an excellent insulating layer;
- resistant to weather conditions;
- easy to clean;
Basic parameters of the ballistic blocks:
Board dimensions (height, length, width)
205mm x 705mm x 305 mm
Dimension tolerance
± 1%
Density
0,98 g/cm3
Standard colors
black, green, red
Material
granules / rubber pulp; polyurethane adhesive
Tensile strength
1.44 MPa according to DIN 53571
Elongation at break
96.57% according to DIN 53571
High temperature resistance
short-term 140 ° C, long-term 120 ° C
Projectile passage diameter
<8% of the projectile diameter
Maximum class of reaction to fire
wall - B s1 d0, ceiling - C s1 d0; according to PN-EN 13501-1 standard
Limit ricochet angle
cal. 9x19 mm Parabellum - 8 degrees
cal. 5.56x45 mm M855 - 8 degrees
cal. 7.62 x39 mm PS - 10 degrees
cal. 7.62 x51 mm NATO - 13 degrees
cal. 7.62x54 mm ŁPS - 16 degrees
cal. 5.56x45 mm M855 - 8 degrees
cal. 7.62 x39 mm PS - 10 degrees
cal. 7.62 x51 mm NATO - 13 degrees
cal. 7.62x54 mm ŁPS - 16 degrees
Resistance to fire of 1 m2 of plates
20 000 rounds, with even fire
The way of joining
tight connection of the side walls
Possible foundation
steel, concrete, plywood
Weight
40,0 kg
Transport
21 items on a 1200mm x 800mm pallet;
Ballistic Block Sizes:
- Ballistic blocks 205x705x305 mm, side edge - flat;
- Ballistic blocks 205x705x305 mm, side edge - flat, tongue and groove up and down.
It is possible to make ballistic elements in a different size and shape.
Our products meet all the requirements for materials used at shooting ranges.
Ballistic blocks absorb the bullets fired at them completely, stop them inside, thus preventing the formation of ricochets and the release of lead oxides.
Ballistic blocks absorb the bullets fired at them completely, stop them inside, thus preventing the formation of ricochets and the release of lead oxides.
Log-in / Register
LOG-INLog in to You account and take advantage of its all possibilities.
CREATE AN ACCOUNTBecome our Partner and start the biggest adventure of Your Life!
REFERRAL LINKSomeone referred us to You? - enter refferal link and enjoy all the privileges it comes with!
refresh page
xPerto PWApp version. 2.0.22.0102
© 2019 - 2024 Codepolis Sp. z o.o.
All rights reserved.
My account